-
高速PCB设计中的理论基础
-
传输线理论、信号完整性(反射、串扰、过冲、地弹、振铃等)、电磁兼容性和时序匹配等等。
-
SPECCTRAQuest设计流程
-
Pre-Placement
-
Board Setup Requirements for Extracting and Applying Topologies
-
Database Setup Advisor
-
拓扑结构的抽取与仿真 Extracting and Simulating Topologies
-
Pre-Route Extraction Setup—Default Model Selection.
-
Pre-Route Extraction Setup—Unrouted Interconnect
-
Pre-Route Template Extraction
-
SQ Signal Explorer Expert
-
Analysis Preferences
-
SigWave
-
Delay Measurements
-
确定和施加约束 Determining and Adding ConstraintsSolution
-
Solution SpaceAnalysis: Step 1 to 6
-
Parametric Sweeps.
-
Constraints
-
Usage of Constraints Defined in Topology Template
-
模板应用和基于约束的布局
-
Template Applications and Constraint-Driven Placement
-
Creating a Topology
-
Wiring the Topology
-
TLines and Trace Models
-
Coupled Traces
-
RLGC Matrix of Coupled Trace Models
-
Crosstalk Simulation in SQ Signal Explorer Expert
-
Simulating with Coupled-Trace Models
-
Sweep Simulation Results with Coupled-Trace Models
-
Extracting a Topology Using the Constraint Manager
-
Electrical Constraint Set
-
Applying Electrical CSet
-
Worksheet Analysis
-
Spacing and Physical Rule Sets
-
Electrical Rule Set
-
基于约束的布线 Constraint-Driven Routing
-
Manual Routing
-
Routing with the SPECCTRA Smart Route
-
Driving Constraints in Routing
-
布线后的DRC检查和分析 Post-Route DRC and Analysis
-
Post-Route Analysis
-
SigNoise
-
Reflection Simulation
-
Reflection Waveform Analysis
-
Comprehensive Simulation
-
Crosstalk Simulation
-
Crosstalk Analysis
-
Simultaneous Switching Noise Simulation
-
SSN Waveform Analysis
-
System-Level Analysis
-
A Complete Design Link
-
Initialize Design Link
-
差分信号设计 Differential Pair Design Exploration
-
Types of Differential Pairs in SPECCTRAQuest
-
Create Differential Pair Using SPECCTRAQuest
-
Create Differential Pair Using Constraint Manager
-
Assigning Differential Pair Signal Models
-
Preference to Extract Unrouted Differential Pair Topology
-
Extracting Unrouted Differential Pair Topology
-
Custom Stimulus to Analyze Differential Pair Topology
-
Differential Pair Topology Analysis
-
Coupled Trace Model and Differential Pair Topology
-
Layout Cross-section Editor
-
Differential Pair Constraints
-
Differential Pair Constraints in the Constraint Manager
-
Differential Pair Analysis in the Constraint Manager
-
Post Route Extraction